I2M Chrome Pro 2 dash (with 11.5mm adaptors)

I2M Chrome Pro 2 dash (with 11.5mm adaptors)

Please note: A special adapter cable needs to be ordered to install the dash on your bike. This cable is model specific. Look on our webshop to find the cable or send us an email with the bike ( + model year) you wish to install the dash on, then we will arrange the correct adapter cable.

The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.

Thanks to the use of a new dedicated hardware, the Chrome Pro 2 is able to read and acquire over 128 Can Bus channels that are alongside the 30 standard channels including speed, rpm, external analoguse, tire pressures and temperatures, GPS, gears, water oil ...The new hardware allows to make the acquisition of the channels fully configurable with a maximum frequency of 500Hz for each channel, thus reaching a total sampling frequency of over 65 kSample/s!Designed for the most demanding user, now the Chrome Pro 2 is not only able to connect to a WiFi network thanks to its integrated antenna, but can create a Wifi HotSpot itself. The connectivity then extends to the management of Polar H7 and H10 low energy heart bands and connectivity to PC and Mac not only via USB stick but also via a special configuration cable.Great attention has been paid to the total configurability of every aspect starting from the alarms, now all RGB, up to the possibility of creating non-linear sensors for each input.A new integrated wiring with a single IP67 connector and new adaptation cards complete the new experience related to the Chrome PRO 2.

Thanks to the collaboration with Tecnoart Sersan, the Chrome PRO 2 is enriched with new screens.

The Chrome PRO 2 has a 433MHz receiver inside that allows it to receive the signals of our TPMS sensors by storing up to 4 sensors for each wheel. It is therefore possible to always keep the pressure of both tires and the temperature of the rim monitored, so as to check correct heating with the tire warmers. The configurable alarms allow you to set the RGB LEDs to report any abnormal pressure and temperature values. Finally, the values are acquired so that they can be processed later. The Chrome PRO 2 is supplied complete with two TPMS sensors with relative adapters for 90-degree valves which can be requested in the 8.5 mm or 11.5 mm diameter format. 11.5mm is in this kit.

Thanks to the new integrated Bluetooth BLE receiver, it is possible to connect the Chrome PRO 2 to a Polar H7 or H10 heart rate sensor (not included). A heart-shaped icon on the screen will indicate the successful connection by making your heart beat on the screen in proportion to your heart rate. The data are then acquired in order to be subsequently reviewed so as to plan a correct physical training and targeted on the basis of personal physical effort.

The Chrome Pro 2 is equipped with a video input to which you can connect a Logitech C270 cam with 1280x720 25fps resolution (not included, availbale seperately), while audio recording is entrusted and an internal microphone so as to be shielded from the wind by returning an excellent rendering of vehicle sounds. A CNC aluminum case is available to replace the original plastic case of the C270 logich. This allows to make the webcam watertight by providing it with a comfortable attachment compatible with GoPro supports and a screw binder connector to connect it directly to the Chrome.

The Chrome Pro 2 comes in a package containing:

• Chrome Pro 2;
• Antenna with 90 degree SMA joint for TPMS receiver;
• GPS receiver;
• Main wiring;
• 2 TPMS receivers with adapters (11,5mm, for stock wheels);
• Lambda sensor BOSH LSU 4.9;
• Cleaning cloth.

You do have to order the bike specific plug & play adaptor to install it on your bike.

For even more info, check the I2M website.

We have Melotti Racing dashboard protectors available to protect this valuable dashboard in case of a crash.